Using the Polysolid tool
The Polysolid tool is used to create a 3D wall. It can also be used to convert a line,
polyline, arc,or a circleto a wall. The Polysolid tool is similar to Polyline tool except that you create a
rectangular shaped wall that has a pre-defined height and width.
Click Home > Modeling > Polysolid on the ribbon; the message, “Specify start
point or [Object Height Width Justify] <Object>:” appears in the command line.
Activate the Ortho Mode on the status bar.
Pick an arbitrary point in the drawing window and move the cursor in the X-direction.
Type 150 in the command line and press ENTER; a 3D wall of 150 length is created.
Select the Arc option from the command line and move the cursor in the Y-direction.
Type 100 as the arc diameter and press ENTER.
Select the Line option from the command line and move the cursor in the –X-direction.
Type 50 and press ENTER.
Move the cursor in the Y-direction and enter 100 as the wall length.
Move the cursor in –X-direction and enter 100 as the wall length.
Select the Close option from the command line; the wall will be closed.
