Using the Offset Faces tool
The Offset Faces tool is used to make parallel copy of faces of a 3D object.
Click Solid > Solid Editing > Faces drop-down > Offset Faces on the ribbon.
Select the front face of the model and press ENTER; the message, “Specify the offset
distance:” appears in the command line.
Type -10 in the command line and press ENTER; the face will be offset.
Press the Esc button to exit the “Enter a face editing option” shortcut menu displayed. For better visibility, delete the sketch lines.
Create a cylinder of 12 mm diameter and 10 mm length at the center of the polysolid, as shown.
Create a truncated cone with the following dimensions.
Base radius: 4
mm Top radius:
2 mm Height: 30
Mm