ASTM 2018: Volume 04.03 Road and Paving Materials; Vehicle Pavement Systems

D5/D5M-13 Standard Test Method for Penetration of Bituminous Materials D8-18 Standard Terminology Relating to Materials for Roads and Pavements D20-03(2014) Standard Test Method for Distillation of Road Tars D70-17 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method) D75/D75M-14 Standard Practice for Sampling Aggregates D98-15 Standard Specification for Calcium Chloride D113-17 Standard Test Method for Ductility of Asphalt Materials D139-16 Standard Test Method for Float Test for Bituminous Materials D140/D140M-16 Standard Practice for Sampling Asphalt Materials D242/D242M-09(2014) Standard Specification for Mineral Filler For Bituminous Paving Mixtures D243/D243M-14 Standard Test Method for Residue of Specified Penetration D244-09(2017) Standard Test Methods and Practices for Emulsified Asphalts D345-02(2010) Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications D402/D402M-14 Standard Test Method for Distillation of Cutback Asphalt D448-12(2017) Standard Classification for Sizes of Aggregate for Road and Bridge Construction D490-92(2016) Standard Specification for Road Tar D517-98(2015) Standard Specification for Asphalt Plank D545-14 Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types) D546-17 Standard Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures D632-12 Standard Specification for Sodium Chloride D633-11(2016) Standard Volume Correction Table for Road Tar D692/D692M-15 Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures D946/D946M-15 Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction D977-17 Standard Specification for Emulsified Asphalt D979/D979M-15 Standard Practice for Sampling Bituminous Paving Mixtures D994/D994M-11(2016) Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type) D1073-16 Standard Specification for Fine Aggregate for Asphalt Paving Mixtures D1074-17 Standard Test Method for Compressive Strength of Asphalt Mixtures D1075-11 Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures D1139/D1139M-15 Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments D1188-07(2015) Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples D1195/D1195M-09(2015) Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements D1196/D1196M-12(2016) Standard Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements D1369-84(2012) Standard Practice for Quantities of Materials for Bituminous Surface Treatments D1461-17 Standard Test Method for Moisture or Volatile Distillates in Asphalt Mixtures D1560-15 Standard Test Methods for Resistance to Deformation and Cohesion of Asphalt Mixtures by Means of Hveem Apparatus D1561/D1561M-13 Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor D1665-98(2014) Standard Test Method for Engler Specific Viscosity of Tar Products D1751-04(2013)e1 Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types) D1752-04a(2013) Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction D1754/D1754M-09(2014) Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test) D1856-09(2015) Standard Test Method for Recovery of Asphalt From Solution by Abson Method D1985-13 Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks D2026/D2026M-15 Standard Specification for Cutback Asphalt (Slow-Curing Type) D2027/D2027M-13 Standard Specification for Cutback Asphalt (Medium-Curing Type) D2028/D2028M-15 Standard Specification for Cutback Asphalt (Rapid-Curing Type) D2041/D2041M-11 Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures D2042-15 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene D2170/D2170M-10 Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens) D2171/D2171M-10 Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer D2172/D2172M-17 Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures D2397/D2397M-17 Standard Specification for Cationic Emulsified Asphalt D2399-12(2017)e1 Standard Practice for Selection of Cutback Asphalts D2419-14 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate D2489/D2489M-16 Standard Test Method for Estimating Degree of Particle Coating of Asphalt Mixtures D2493/D2493M-16 Standard Practice for Viscosity-Temperature Chart for Asphalt Binders D2628-91(2016) Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements D2726/D2726M-17 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures D2728-98(2014) Standard Practice for Paving Uses and Application Temperatures for Road Tars D2835-89(2017) Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements D2872-12e1 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) D2940/D2940M-15 Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports D2950/D2950M-14 Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods D2995-14 Standard Practice for Estimating Application Rate and Residual Application Rate of Bituminous Distributors D3042-17 Standard Test Method for Insoluble Residue in Carbonate Aggregates D3141/D3141M-15 Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements D3142/D3142M-17 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method D3143/D3143M-13 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus D3203/D3203M-17 Standard Test Method for Percent Air Voids in Compacted Asphalt Mixtures D3279-12e1 Standard Test Method for n-Heptane Insolubles D3289-17 Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method) D3319-11(2017) Standard Practice for the Accelerated Polishing of Aggregates Using the British Wheel D3381/D3381M-13 Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction D3387-11 Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM) D3542-08(2013) Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges D3549/D3549M-17 Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens D3625/D3625M-12 Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water D3628-15 Standard Practice for Selection and Use of Emulsified Asphalts D3633/D3633M-12 Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems D3665-12(2017) Standard Practice for Random Sampling of Construction Materials D3666-16 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials D3744/D3744M-11a Standard Test Method for Aggregate Durability Index D3910-15 Standard Practices for Design, Testing, and Construction of Slurry Seal D4014-03(2012) Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges D4070-15 Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures D4071-84(2016) Standard Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems D4124-09(2018) Standard Test Method for Separation of Asphalt into Four Fractions D4125/D4125M-10(2016) Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method D4215-07(2013) Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures D4280-15 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers D4311/D4311M-15 Standard Practice for Determining Asphalt Volume Correction to a Base Temperature D4383-12 Standard Specification for Plowable, Raised Retroreflective Pavement Markers D4460-97(2015) Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods D4469-17 Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in Asphalt Mixtures D4505-12(2017) Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life D4552/D4552M-10(2016)e1 Standard Practice for Classifying Hot-Mix Recycling Agents D4561-11 Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials D4580/D4580M-12 Standard Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding D4592-12(2017) Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life D4602-93(2015) Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment D4694-09(2015) Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device D4695-03(2015) Standard Guide for General Pavement Deflection Measurements D4748-10(2015) Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar D4788-03(2013) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography D4791-10 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate D4792/D4792M-13 Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions D4867/D4867M-09(2014) Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures D4887/D4887M-11(2016) Standard Practice for Preparation of Viscosity Blends for Hot Recycled Asphalt Materials D4956-17 Standard Specification for Retroreflective Sheeting for Traffic Control D4957-18 Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Asphalts by Vacuum Capillary Viscometer D5078/D5078M-11(2016) Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements D5106-15 Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures D5148-10 Standard Test Method for Centrifuge Kerosine Equivalent D5167-13 Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation D5249-10(2016) Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints D5329-16 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements D5340-12 Standard Test Method for Airport Pavement Condition Index Surveys D5360-15 Standard Practice for Design and Construction of Bituminous Surface Treatments D5361/D5361M-16 Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing D5404/D5404M-12(2017) Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator D5444-15 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate D5505-14 Standard Practice for Classifying Emulsified Recycling Agents D5581-07a(2013) Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen) D5624-13 Standard Practice for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications D5710/D5710M-15 Standard Specification for Trinidad Lake Modified Asphalt D5801-17 Standard Test Method for Toughness and Tenacity of Asphalt Materials D5821-13(2017) Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate D5858-96(2015) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory D5893/D5893M-16 Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements D5973-97(2017) Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing D5977-15 Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures D6084/D6084M-13 Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer D6087-08(2015)e1 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar D6153-15 Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems D6154-15 Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction D6155-15 Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures D6297-13 Standard Specification for Asphaltic Plug Joints for Bridges D6307-16 Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method D6372-15 Standard Practice for Design, Testing, and Construction of Microsurfacing D6373-16 Standard Specification for Performance Graded Asphalt Binder D6390-11(2017) Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures D6433-18 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys D6521-13 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV) D6607-00(2015) Standard Practice for Inclusion of Precision Statement Variation in Specification Limits D6608-12 Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes D6626-15 Standard Specification for Performance Graded Trinidad Lake Modified Asphalt Binder D6627/D6627M-11(2016) Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures D6628-16 Standard Specification for Color of Pavement Marking Materials D6648-08(2016) Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) D6690-15 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements D6703-14 Standard Test Method for Automated Heithaus Titrimetry D6704-08(2015) Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material D6723-12 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT) D6752/D6752M-17 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method D6816-11(2016) Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders D6857/D6857M-17 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method D6924-03(2017) Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges D6925-15 Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor D6926-16 Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus D6927-15 Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures D6928-17 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus D6929-16 Standard Practice to Evaluate the Effect of Freezing on Emulsified Asphalts D6930-10 Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts D6931-17 Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures D6932/D6932M-08(2013) Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures D6933-13 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test) D6934-08(2016) Standard Test Method for Residue by Evaporation of Emulsified Asphalt D6935-17 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt D6936-17 Standard Test Method for Determining Demulsibility of Emulsified Asphalt D6937-16 Standard Test Method for Determining Density of Emulsified Asphalt D6951/D6951M-09(2015) Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications D6995-05(2013) Standard Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix (Gmm) D6997-12 Standard Test Method for Distillation of Emulsified Asphalt D6998-11 Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts D6999-12 Standard Practice for Miscibility of Emulsified Asphalts D7000-11(2017) Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples D7063/D7063M-17 Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture Samples D7064/D7064M-08(2013) Standard Practice for Open-Graded Friction Course (OGFC) Mix Design D7113/D7113M-10(2016) Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods D7115-10(2015) Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading D7116-16 Standard Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavements D7172-14 Standard Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared D7173-14 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt D7174-05(2016) Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction D7175-15 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer D7196-16 Standard Test Method for Raveling Test of Cold Mixed Emulsified Asphalt Samples D7226-13(2017) Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer D7227/D7227M-17 Standard Practice for Rapid Drying of Compacted Asphalt Mixture Specimens Using Vacuum Drying Apparatus D7228-06a(2015) Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures D7229-08(2013)e1 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor D7312-10 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST) D7313-13 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry D7369-11 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test D7370/D7370M-14 Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion D7402-09(2017) Standard Practice for Identifying Cationic Emulsified Asphalts D7403-09(2017) Standard Test Method for Determination of Residue of Emulsified Asphalt by Low-Temperature Vacuum Distillation D7404-07(2016) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer D7405-15 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer D7428-15 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus D7460-10 Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending D7495-12 Standard Specification for Minimum Requirements for Accreditation Bodies that Accredit Agencies Testing and Inspecting Road and Paving Materials D7496-17 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer D7497-09(2016) Standard Practice for Recovering Residue from Emulsified Asphalt Using Low Temperature Evaporative Technique D7552-09(2014) Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer D7553-15 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide D7564/D7564M-16 Standard Practice for Construction of Asphalt-Rubber Cape Seal D7585/D7585M-10(2015) Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments D7643-16 Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders D7741/D7741M-11(2017) Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer D7870/D7870M-13 Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure D7906-14 Standard Practice for Recovery of Asphalt from Solution Using Toluene and the Rotary Evaporator D7942-15 Standard Specification for Thermoplastic Pavement Markings in Non Snow Plow Areas D7944-15 Standard Practice for Recovery of Emulsified Asphalt Residue Using a Vacuum Oven D7981-15 Standard Practice for Compaction of Prismatic Asphalt Specimens by Means of the Shear Box Compactor D8044-16 Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures D8055-17 Standard Guide for Selecting an Appropriate Electronic Thermometer for Replacing Mercury Thermometers in D04 Road and Paving Standards D8078-16 Standard Test Method for Ash Content of Asphalt and Emulsified Asphalt Residues D8079-16 Standard Practice for Preparation of Compacted Slab Asphalt Mix Samples Using a Segmented Rolling Compactor D8125-17 Standard Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE) D8139-17 Standard Specification for Semi-Rigid, Closed-Cell Polypropylene Foam, Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction D8140-18 Standard Guide for the Use of Foundry Sand in Asphalt Mixtures E274/E274M-15 Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire E303-93(2013) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester E445/E445M-15 Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires E501-08(2015) Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests E524-08(2015) Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests E556/E556M-11(2015) Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level) E660-90(2015) Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine E670-09(2015) Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter E867-06(2012) Standard Terminology Relating to Vehicle-Pavement Systems E950/E950M-09(2018) Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer-Established Inertial Profiling Reference E965-15 Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique E1082-90(2017) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness E1166-00(2015) Standard Guide for Network Level Pavement Management E1170-97(2017) Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces E1215-93(2017) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness E1274-18 Standard Test Method for Measuring Pavement Roughness Using a Profilograph E1318-09(2017) Standard Specification for Highway Weigh-In-Motion (WIM) Systems with User Requirements and Test Methods E1337-90(2012) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire E1364-95(2017) Standard Test Method for Measuring Road Roughness by Static Level Method E1448/E1448M-09(2015) Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness E1489-08(2013) Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device E1551-16 Standard Specification for a Size 4.00-8 Smooth Tread Friction Test Tire E1656/E1656M-11(2016) Standard Guide for Classification of Automated Pavement Condition Survey Equipment E1703/E1703M-10(2015) Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge E1777-09(2015) Standard Guide for Prioritization of Data Needs for Pavement Management E1778-98a(2015) Standard Terminology Relating to Pavement Distress E1844-08(2015) Standard Specification for A Size 10?×?4–5 Smooth-Tread Friction Test Tire E1845-15 Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth E1859/E1859M-11(2015) Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique E1889-97(2015) Standard Guide for Pavement Management Implementation E1890-11(2015) Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment E1926-08(2015) Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements E1927-98(2018) Standard Guide for Conducting Subjective Pavement Ride Quality Ratings E1957-04(2010) Standard Practice for Installing Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers E1960-07(2015) Standard Practice for Calculating International Friction Index of a Pavement Surface E2034-99(2017) Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces E2100-04(2015) Standard Practice for Calculating the International Runway Friction Index E2101-15 Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer E2133-03(2013) Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface E2157-15 Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter E2213-03(2010) Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer (PHY) Specifications E2259-03a(2011) Standard Guide for Archiving and Retrieving ITS-Generated Data E2300-09(2017) Standard Specification for Highway Traffic Monitoring Devices E2340/E2340M-11(2015) Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique E2341/E2341M-05(2014) Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites E2380/E2380M-15 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter E2415-05(2012) Standard Practice for Installing Piezoelectric Highway Traffic Sensors E2467-05(2012) Standard Practice for Developing Axle Count Adjustment Factors E2468-05(2012) Standard Practice for Metadata to Support Archived Data Management Systems E2532-09(2017) Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices E2560-17 Standard Specification for Data Format for Pavement Profile E2561-07a(2012) Standard Practice for the Installation of Inductive Loop Detectors E2583-07(2015) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD) E2665-08(2017) Standard Specification for Archiving ITS-Generated Traffic Monitoring Data E2666-09(2014) Standard Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports E2667-09(2017) Standard Practice for Acquiring Intersection Turning Movement Traffic Data E2759-10 Standard Practice for Highway Traffic Monitoring Truth-in-Data E2793-16 Standard Guide for Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment E2835-11(2015) Standard Test Method for Measuring Deflections using a Portable Impulse Plate Load Test Device E2840-11(2015) Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots E2883-13 Standard Guide for Standard Guide for the Evaluation, and Calibration, Continuous Friction Measurement Equipment (CFME) E2955-13 Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces E3013/E3013M-17 Standard Test Method for Evaluating Concrete Pavement Dowel Bar Alignment Using Magnetic Pulse Induction E3028-16e1 Standard Practice for Computing Wheelchair Pathway Roughness Index as Related to Comfort, Passability, and Whole Body Vibrations from Longitudinal Profile Measurements E3145-18 Standard Test Method for User-Level Calibration of Dynamic Friction Tester (DF Tester)