Learn

Our New E-Store -> civilmdc.sellix.io

Download Books & Software
Menu
Engineering Drawing

PLANES OF PROJECTION

January 4, 2023 Civil Engineering Projects

PLANES OF PROJECTION Plane Plane is a two dimensional smooth surface having the third dimension negligible. Projection Projection is ...

PLANES OF PROJECTION

ORTHOGRAPHIC DRAWING FACES OF THE OBJECT

January 4, 2023 Civil Engineering Projects

ORTHOGRAPHIC DRAWING FACES OF THE OBJECT There are six main faces of the object namely front, back or rear, left side, right side, top and ...

ORTHOGRAPHIC DRAWING FACES OF THE OBJECT

Use of Instruments and Lettering PROBLEMS

January 4, 2023 Civil Engineering Projects

PROBLEMS 2.1 Leaving a gap of 1-in from the top border line, draw guide lines for five lettering lines maintaining height of letters equal to ...

Use of Instruments and Lettering PROBLEMS

HINTS FOR GOOD LINEWORK

January 4, 2023 Civil Engineering Projects

HINTS FOR GOOD LINEWORK 1. Ordinary main lines on the drawing should be thin but at the same time bright and these should be of uniform ...

HINTS FOR GOOD LINEWORK

Array

January 4, 2023 Civil Engineering Projects

APPLIED GEOMETRY To Join Two Lines at Right Angle by a Quarter Circle There may be two methods to locate centre of the curve so that it ...

APPLIED GEOMETRY

LETTERING ON THE DRAWING

January 4, 2023 Civil Engineering Projects

LETTERING ON THE DRAWING Generally all the lettering on the sheet is carried out in capital letters and following points should be kept in mind ...

LETTERING ON THE DRAWING

MEASUREMENTS IN FRACTIONS OF AN INCH

January 4, 2023 Civil Engineering Projects

MEASUREMENTS IN FRACTIONS OF AN INCH By any fraction x/y (of any quantity or unit), we mean that the given quantity is divided first into ...

MEASUREMENTS IN FRACTIONS OF AN INCH

BORDER LINES AND SEAL

January 4, 2023 Civil Engineering Projects

BORDER LINES AND SEAL Border line is usually drawn with HB-pencil leaving 1/2" spacing from all the sides except on the left where it ...

BORDER LINES AND SEAL

FIXING THE DRAWING SHEET

January 4, 2023 Civil Engineering Projects

FIXING THE DRAWING SHEET Drawing sheet should be fixed on the board in. such a way that its upper longer side is truly horizontal. First of ...

FIXING THE DRAWING SHEET

HORIZONTAL AND VERTICAL LINES ON THE BOARD

January 4, 2023 Civil Engineering Projects

HORIZONTAL AND VERTICAL LINES ON THE BOARD For right-handers, board should always be placed in such a position so that its working edge is on ...

HORIZONTAL AND VERTICAL LINES ON THE BOARD

SHARPENING THE PENCIL

January 4, 2023 Civil Engineering Projects

SHARPENING THE PENCIL Lead of a pencil should always be kept sharp, only a sharp lead is capable of producing clean black lines that sparkle ...

SHARPENING THE PENCIL

CLASSIFICATION OF LINES

January 4, 2023 Civil Engineering Projects

USE OF INSTRUMENTS AND LETTERING CLASSIFICATION  OF LINES Lines may be classified according to their thickness, darkness and shape: ...

CLASSIFICATION OF LINES

“Design is the act of creating the specifications for a product or process that best satisfies the design criteria.

Share knowledge
Learn
Logo
Enable registration in settings - general