Designing a girder for an end-back frame involves considering the structural requirements and load conditions specific to the frame configuration. Here’s a general process for designing a girder for an end-back frame: Determine the frame geometry and loading: Obtain the frame geometry and dimensions from the project specifications or drawings.Identify the applied loads, including dead […]
Design of Girder for endback frame Read More »
To design a rectangular beam section subjected to bending moment (B.M.) and shear force (S.F.), you need to follow these steps: Determine the design loads: Obtain the values of the applied loads, such as dead loads and live loads, from the project specifications or relevant codes.Consider any additional loads like wind or seismic forces if
DESIGN OF RECTANGULAR SECTION SUBJECTED TO B.M and S.F Read More »
Designing beams for repeated floors typically involves considering the structural requirements for multi-story buildings with similar floor layouts. Here’s a general approach for designing beams in such cases: Gather project information: Obtain architectural and structural drawings of the building, including floor plans, elevations, and sections.Understand the floor layout, column positions, and clear spans between columns.Identify
Design of beams for the repeated floors Read More »
Designing beams involves determining the appropriate size and shape of a beam to safely support the desired load and meet specific design criteria. Here’s a general process for designing beams: Determine the loads and support conditions: Identify all the applied loads, including dead loads (permanent), live loads (variable), and other loads such as wind or
Based on the calculations, a rectangular steel beam with a width of 150 mm and a height of 300 mm would be suitable for this design. However, please note that this is just an example,
Example for Design of beams Read More »
