One-way slab is a type of concrete slab in which loads are transferred in one direction to the supporting beams and columns. Therefore, the bending occurs in only one direction. The design of one-way slab is simple and can be carried out easily.
ONE-WAY SOLID RC SLAB DESIGN Read More »
“GRDSLAB” — CONCRETE SLAB ON GRADE ANALYSIS Program Description: “GRDSLAB” is a spreadsheet program written in MS-Excel for the purpose of analysis of concrete slabs ongrade. Specifically, a concrete slab on grade may be subjected to concentrated post or wheel loading. Thenfor the given parameters, the slab flexural, bearing, and shear stresses are checked, the
CONCRETE SLAB ON GRADE ANALYSIS Read More »
Flat slab is a reinforced concrete slab supported directly by concrete columns without the use of beams. Flat slab is defined as one sided or two-sided support system with sheer load of the slab being concentrated on the supporting columns and a square slab called ‘drop panels
FLAT SLAB ANALYSIS & DESIGN Read More »
“DECKSLAB” — SLAB ON METAL DECK ANALYSIS / DESIGN Program Description: “DECKSLAB” is a spreadsheet program written in MS-Excel for the purpose of analysis and design of slabs onmetal deck. Both composite deck slabs and form deck slabs can be analyzed and designed for 3 differentloading conditions. Specifically, the flexural moment capacity for both positive
SLAB ON METAL DECK ANALYSIS DESIGN Read More »
“USGS96SA” — USGS 1996 SPECTRAL ACCELERATION VALUES Program Description: “USGS96SA” is a spreadsheet program written in MS-Excel for the purpose of determining the mappedspectral acceleration values Ss and S1 to be used for seismic analysis and design in either the IBC 2000or IBC 2003 Codes. Results may be obtained by input of location Zip Code
SEISMIC DESIGN SPECTRAL ACCELERATION VALUES Read More »
“IBC2003E” — IBC 2003 SEISMIC ANALYSIS PROGRAM Program Description: “IBC2003E” is a spreadsheet program written in MS-Excel for the purpose of seismic loading analysis forbuildings and various nonbuilding structures, as well as architectural, mechanical, and electrical componentsper the IBC 2003 and ASCE 7-02 Codes. Specifically, the total base seismic shear for buildings and nonbuildingstructures is
IBC 2003 SEISMIC ANALYSIS PROGRAM Read More »
“IBC2000E” — IBC 2000 SEISMIC ANALYSIS PROGRAM Program Description: “IBC2000E” is a spreadsheet program written in MS-Excel for the purpose of seismic loading analysis forbuildings and various nonbuilding structures, as well as architectural, mechanical, and electrical componentsper the IBC 2000 Code. Specifically, the total base seismic shear for buildings and nonbuilding structures iscalculated. For Multi-Level
IBC 2000 SEISMIC ANALYSIS PROGRAM Read More »
A retaining wall is a strucBase shear is an estimate of the maximum expected lateral force on the base of the structure due to seismic activity. It is calculated using the seismic zone, soil material, and building code lateral force equations (Figure 10.3).
Seismic Base Shear Read More »
