Civil MDC

Design of Steel Structures to Eurocodes by Ioannis Vayas, John Ermopoulos, George Ioannidis 2

Design of Steel Structures to Eurocodes by Ioannis Vayas, John Ermopoulos, George Ioannidis

This textbook describes the rules for the design of steel and composite building structures according to Eurocodes, covering the structure as a whole, as well as the design of individual structural components and connections. It addresses the following topics: the basis of design in the Eurocodes framework; the loads applied to building structures; the load combinations for the various limit states of design and the main steel properties and steel fabrication methods; the models and methods of structural analysis in combination with the structural imperfections and the cross-section classification according to compactness; the cross-section resistances when subjected to axial and shear forces, bending or torsional moments and to combinations of the above; component design and more specifically the design of components sensitive to instability phenomena, such as flexural, torsional and lateral-torsional buckling (a section is devoted to composite beams); the design of connections and joints executed by bolting or welding, including beam to column connections in frame structures; and alternative configurations to be considered during the conceptual design phase for various types of single or multi-storey buildings, and the design of crane supporting beams. In addition, the fabrication and erection procedures, as well as the related quality requirements and the quality control methods are extensively discussed (including the procedures for bolting, welding and surface protection). The book is supplemented by more than fifty numerical examples that explain in detail the appropriate procedures to deal with each particular problem in the design of steel structures in accordance with Eurocodes. The book is an ideal learning resource for students of structural engineering, as well as a valuable reference for practicing engineers who perform designs on basis of Eurocodes. Table of contents : Front Matter ….Pages I-XXXIII Basis of Design (Ioannis Vayas, John Ermopoulos, George Ioannidis)….Pages 1-30 Models and methods of analysis (Ioannis Vayas, John Ermopoulos, George Ioannidis)….Pages 31-74 Cross-section design (Ioannis Vayas, John Ermopoulos, George Ioannidis)….Pages 75-114 Member design (Ioannis Vayas, John Ermopoulos, George Ioannidis)….Pages 115-170 Design of connections and joints (Ioannis Vayas, John Ermopoulos, George Ioannidis)….Pages 171-216 Single storey buildings (Ioannis Vayas, John Ermopoulos, George Ioannidis)….Pages 217-294 Multi storey buildings (Ioannis Vayas, John Ermopoulos, George Ioannidis)….Pages 295-336 Fabrication and erection (Ioannis Vayas, John Ermopoulos, George Ioannidis)….Pages 337-400 Design Examples (Ioannis Vayas, John Ermopoulos, George Ioannidis)….Pages 401-595

Design of Steel Structures to Eurocodes by Ioannis Vayas, John Ermopoulos, George Ioannidis 3

2 thoughts on “Design of Steel Structures to Eurocodes by Ioannis Vayas, John Ermopoulos, George Ioannidis”

Leave a Reply to admin Cancel Reply

Your email address will not be published. Required fields are marked *

Scroll to Top